Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: meier@mtap.src.honeywell.com (Christopher M. Meier)
Newsgroups: comp.sys.sun
Subject: Re: fsck doesn't check all filesystems
Message-ID: <16172@srcsip.UUCP>
Date: 14 Feb 89 19:11:29 GMT
References: <8901242325.AA29971@bu-it.BU.EDU>
Sender: usenet@rice.edu
Organization: Honeywell Systems & Research Center, Camden, MN
Lines: 14
Approved: Sun-Spots@rice.edu
Original-Date: 4 Feb 89 17:57:44 GMT
X-Sun-Spots-Digest: Volume 7, Issue 155, message 1 of 18
X-Issue-Reference: v7n132

jdh@bu-it.bu.edu (Jason Heirtzler) writes:
> Has anyone noticed that fsck sometimes only checks the root partition
> (xy0a) when you boot multi-user?...

Strangely enough, yes.  I noticed it for the first (and only) time 2 days
ago.  This was on a Sun-3/160 SunOS 3.5 with a ciprico-3200 (4drive)
controller using version 1.14 of their driver, on a newly installed 1.2Meg
sabre.

Any ideas?

@ Christopher M. Meier MN65-2300 Honeywell Systems & Research Center
@ 3660 Technology Drive          Mpls, MN  55418      (612) 782-7191
@ meier@SRC.Honeywell.COM | !srcsip!meier