Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: mcvax!duttnph!lucas@uunet.uu.net (Lucas van Vliet)
Newsgroups: comp.sys.sun
Subject: adding VME-Bus memory to a SUN 3-110?
Message-ID: <634@dutrun.UUCP>
Date: 14 Feb 89 23:33:54 GMT
Sender: usenet@rice.edu
Organization: Delft University of Technology, The Netherlands
Lines: 13
Approved: Sun-Spots@rice.edu
Original-Date: 3 Feb 89 14:14:25 GMT
X-Sun-Spots-Digest: Volume 7, Issue 155, message 14 of 18

I have a SUN3-110 with only 4 MB of RAM what I would like to expand with
another 4 MB.  Those additional 4 MBytes sit on a Tadpole VME-bus board.
We are running SunOS 4.0.  Who knows which address I should set on the
board and what else I have to do so my workstation will find this memory
during a reboot.  Do I have to change my eeprom settings?  Is there
anything I should do to let the kernel know that another memory board was
plugged in?

	Lucas van Vliet
	Pattern Recognition Group
	Delft University of Technology
	lucas@duttnph.UUCP
	mcvax!hp4nl!dutrun!duttnph!lucas