Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!rochester!rit!cci632!ccicpg!turnkey!sandy From: sandy@turnkey.TCC.COM (Sanford 'Sandy' Zelkovitz) Newsgroups: comp.unix.xenix Subject: HDB UUCP Problem Keywords: HDBUUCP Xenix_386_2_3_1 Message-ID: <5609@turnkey.TCC.COM> Date: 7 Feb 89 04:14:29 GMT Organization: Turnkey Computer Consultants, Costa Mesa, Ca. Lines: 21 I have run across another problem using flow control with Telebit-Plus modem! This one seems to be in uucico. If I have a user log into the system, using a standard shell, and I do a "stty" on the port, ctsflow is enabled < I call it out in my gettydefs file >. HOWEVER, when I do a "stty" command while a uucp transfer is in progress at 19.2K baud, I get returned a -ctsflow !!!!!! It seems that SCO must be doing an ioctl call in uucico which removes the preset terminal parameters. Actually, they should since uucp should be running at 8N1. But CTSFLOW SHOULD NOT BE REMOVED if enabled! I have sent two requests already to SCO for their CTS/RST Flow control patches; however, I have not heard a single word from them. I am wondering if one of the patches is to uucico to allow the preset getty/gettydef parameters to be used without changes in uucico. -- Sanford Zelkovitz XBBS 714-898-8634 UUCP: ....att!hermix!alphacm!sandy ....trwrb!ucla-an!alphacm!sandy ....uunet!turnkey!alphacm!sandy ....ucbvax!ucivax!icnvax!alphacm!sandy DATA: 714-898-8634 VOICE: 714-894-7898