Path: utzoo!attcan!utgpu!watmath!uunet!labrea!rutgers!iuvax!bsu-cs!kmzvokel
From: kmzvokel@bsu-cs.UUCP (Kenneth M. Zvokel)
Newsgroups: unix-pc.general
Subject: Using the serial ports
Keywords: unix-pc, serial port
Message-ID: <5626@bsu-cs.UUCP>
Date: 10 Feb 89 12:10:15 GMT
Organization: CS Dept, Ball St U, Muncie, Indiana
Lines: 20

Help!!!!

I am trying to find information on how to use the serial port, info such
as setting the baud, parity, data bits etc.

I am trying to run a small robot from the serial port.  I have already had
success using the IBM-PC with the control program in C.  I thought if I
just transfered the source code and rewrote the communications driver
I would be in business.  but I can't find the info in the manuals.


any help would be appreciated


thanks

ken zvokel

BSU -CS