Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!batcomputer!itsgw!steinmetz!uunet!vicorp!dale
From: dale@vicorp.UUCP (Dale Nielsen)
Newsgroups: comp.dcom.modems
Subject: using TB+ modem to call slow and PEP sites
Keywords: telebit modem
Message-ID: <822@vicorp.UUCP>
Date: 15 Feb 89 22:57:37 GMT
Organization: V. I. Corporation, Amherst, Massachusetts
Lines: 18

I have a TB+ modem that I'm using to connect to several different
uucp sites.  One of them has a TB+ modem, while the others just
have 2400 baud modems.  The problem is that when I call the PEP site
their modem answers at 2400 baud before it tries PEP high speed mode,
so I end up hooking up at 2400 rather than PEP.  If I set the modem
to PEP mode, then I can't talk to the 2400 baud sites.  I tried
putting commands in my chat script in L.sys in order to set it
properly before dialing, but I can't get it to even respond with
"OK" when I send it "AT\r" or "AT" although it does respond properly
when I just tip to it and type these commands in.

If anyone has any suggestions to make this work, it would be
appreciated.

					--Dale Nielsen
					  V. I. Corporation
					  dale@vicorp.UUCP
					  (413) 253-3482