Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!gatech!hubcap!ncrcae!ncrlnk!uunet!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.dcom.modems
Subject: TB+ register 120
Message-ID: <249@wa3wbu.UUCP>
Date: 19 Feb 89 00:07:01 GMT
Organization: WA3WBU, Marysville,PA
Lines: 18


    After reading a recent posting I tried changing the settings of
register 120 which is supposed to be the packet size. I was able
to change this setting to a 12 (it was formerly a zero).  I also changed
the settings on the receiving end to the same thing and proceeded to
try a file transfer. I noticed no difference in the way the SD/RD Leds
flashed and no noticable throughput difference. Could it be that my
changing the setting had no effect at all ?  Has anyone else tried this and
noted any different results ?


					John


-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |           ARPA: john@wa3wbu.uu.net 
Marysville, PA 17053             |           Packet: WA3WBU @ AK3P