Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!batcomputer!itsgw!steinmetz!uunet!ispi!jbayer
From: jbayer@ispi.UUCP (Jonathan Bayer)
Newsgroups: comp.dcom.modems
Subject: Re: Telebit Modems & SCO2.3.1
Keywords: Telebit, Dialin dialout, Xenix
Message-ID: <468@ispi.UUCP>
Date: 19 Feb 89 19:31:17 GMT
References: <105@nytim.UUCP>
Reply-To: jbayer@ispi.UUCP (Jonathan Bayer)
Organization: Intelligent Software Products, Inc.
Lines: 20

In article <105@nytim.UUCP> tim@nytim.UUCP (Tim's Personal Id.) writes:
>
>We are running SCO 2.3.1 on Compaq 386 machines and have one Telebit
>external modem.  We need to use it in dial-in/dial-out mode (only one
>modem and phone line) and we need to support BOTH 2400 and high-speed
>(9600 and 19200) together.


The easiest way is to lock the interface speed at 19200 baud, and tell
getty and uucp that 19200 baud is the only speed available on the modem.  
You also have to tell the modem to communicate with the calling modem 
(for incoming calls) at the requested speed.


JB
-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
19 Virginia Ave.				...uunet!ispi!jbayer
Rockville Centre, NY 11570  (516) 766-2867    jbayer@ispi.UUCP