Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!sharkey!mcf!teemc!wayne
From: wayne@teemc.UUCP (//ichael R. //ayne)
Newsgroups: comp.dcom.modems
Subject: Re: TB+ register 120
Message-ID: <38181@teemc.UUCP>
Date: 21 Feb 89 04:32:46 GMT
References: <249@wa3wbu.UUCP>
Reply-To: wayne@teemc.UUCP (/\/\ichael R. \/\/ayne)
Organization: TMC & Associates, Troy, MI
Lines: 23

In article <249@wa3wbu.UUCP> john@wa3wbu.UUCP (John Gayman) writes:
->
->    After reading a recent posting I tried changing the settings of
->register 120 which is supposed to be the packet size. I was able
->to change this setting to a 12 (it was formerly a zero).  I also changed
->the settings on the receiving end to the same thing and proceeded to
->try a file transfer. I noticed no difference in the way the SD/RD Leds
->flashed and no noticable throughput difference. 

	It is my understanding that it deals with INTERACTIVE use, not
file xfer.  It would be REAL nice if Telebit would answer this rather
than leaving us to our speculation.  I got the information second hand
and am still running on version 3 EPROMS so have no applicable experience.

	Can it really be that no one else has gleaned any information out
of Telebit regarding modem settings?  Perhaps it's time to start disassembling
some EPROMS.  Now, where'd I put that 680x0 disassembler...

/\/\ \/\/
-- 
Michael R. Wayne      ---      TMC & Associates      ---      wayne@teemc.uucp
INTERNET: wayne%teemc.uucp@mailgw.cc.umich.edu        uunet!edsews!teemc!wayne 
      Operator of the only Michigan licensed 240 Horsepower UNIX machine