Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!sag1.ssl.berkeley.edu!johnf
From: johnf@sag1.ssl.berkeley.edu (John Flanagan)
Newsgroups: comp.sys.amiga
Subject: Re: lousey video
Summary: Me too.
Keywords: ghosting, fuzzy wuzzy was a bear.
Message-ID: <20468@agate.BERKELEY.EDU>
Date: 16 Feb 89 17:19:11 GMT
References: <1972@pur-phy> <170@ziggy.UUCP>
Sender: usenet@agate.BERKELEY.EDU
Distribution: comp.sys.amiga
Organization: University of California, Berkeley
Lines: 20

In article <170@ziggy.UUCP> scotty@ziggy.UUCP (Scott Drysdale) writes:
>In article <1972@pur-phy> tlm@newton.physics.purdue.edu.UUCP (Timothy Lee Meisenheimer) writes:
>>...One set of raster lines (either odd or even ones - I don't
>>know) stands out compared to the other set. Some of the solid fill areas -
>>like that in the front and back arrangement gadgets get ghosted to the left.
>>After a while the video will be cleaned back up and will look sharp again.
>>tim.
>i've got the same problem with my 1084 and 1000 - i think it's the monitor.
> ...
>  --Scotty
	This problem was widely reported on the net last summer;  I have it 
too (1084, A500).  I took the monitor into the dealer to show them the 
problem.  When I first turned it on in the shop, it displayed the problem for
about five minutes, then cleared up.  They held onto the monitor for a
week, and the problem never showed itself again at their shop.  The
loaner they gave me for the week worked fine at my house.  When I
brought my monitor back home, it started acting up again.  Oh well.
	I've found that putting a fan on the monitor usually helps.
--John Flanagan
--johnf@sag4.ssl.berkeley.edu