Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!hplabs!hp-sdd!ncr-sd!sagpd1!monty
From: monty@sagpd1.UUCP (Monty Saine)
Newsgroups: comp.sys.amiga
Subject: SCSI driver - generic source needed
Message-ID: <315@sagpd1.UUCP>
Date: 16 Feb 89 20:29:49 GMT
Reply-To: monty@sagpd1.UUCP (Monty Saine)
Organization: Scientific Atlanta, Government Products Div, San Diego, CA
Lines: 28



HI_lo Everyone,

    I have a need (above and beyond the normall physical ones) for the
source to a generic SCSI driver. I am attempting to homebrew a SCSI
expansion board with 2 meg of memory. If anyone out there has a copy of
a PD driver for a SCSI board/chip set I am looking for a block on which to
build my custom driver. When I get this board working I will post the software
and schematic to the net. This implies that the code must be either PD or
at least shareware (with authors permission for this use). I will settle for
a good algorithm but a working (???) generic driver would save a lot of
time. 
    My intentions are to use the Western Digital WD33C93 and a bronulli (sp)
drive that I have laying around, but I'll take any chips driver as a basis to 
build on.

Thanks in advance,

Monty

P.S. Please e-mail or send via snail mail if thats the only way you have.

Monty L. Saine
4551 Piute Pl. 
San Diego, ca 92117
(619) 272-7468	Home
(619) 268-7207	Work