Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!nrl-cmf!ames!amdahl!oliveb!amiga!jimm
From: jimm@amiga.UUCP (Jim Mackraz)
Newsgroups: comp.sys.amiga.tech
Subject: Re: More Workbench Screens
Message-ID: <3369@amiga.UUCP>
Date: 21 Feb 89 19:29:29 GMT
References: <8747@dasys1.UUCP>
Reply-To: jimm@cloyd.UUCP (Jim Mackraz)
Organization: Commodore-Amiga Inc, Los Gatos CA
Lines: 21

In article <8747@dasys1.UUCP> sterling@dasys1.UUCP (Sterling Brown) writes:

)    Just think of the possibilities of having workbench distribute its
)    windows across 2 screens, or 3 screens, or 4 screens,...

We did, and you'll be fully supported in V1.4.

)    This VERY simple 'c' code will do nothing more than open a screen
)    and put a SHELL on it.  After you run it, you can experiment with
)    the workbench windows.  Remember, Only programs that open their
)    windows to the Workbench screen can share the alternate screens.

And remember, this will probably blow right up with V1.4, so don't burn
it into any commercial applications.  As an interim toy, sure, go wild.

	jimm
-- 
Jim Mackraz, I and I Computing	   	"Like you said when we crawled down
{cbmvax,well,oliveb}!amiga!jimm          from the trees: We're in transition."
							- Gang of Four
Opinions are my own.  Comments are not to be taken as Commodore official policy.