Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!apple!oliveb!tymix!antares!jms
From: jms@antares.UUCP (Joe Smith)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Help with Icons... I better clarify...
Message-ID: <400@antares.UUCP>
Date: 24 Feb 89 05:57:38 GMT
References: <1585@leah.Albany.Edu>
Reply-To: jms@antares.UUCP (Joe Smith)
Organization: Tymnet QSATS, San Jose CA
Lines: 17

In article <1585@leah.Albany.Edu> jac423@leah.Albany.Edu (Julius Andrew Cisek) writes:
>It seems I better clarify my problem. I create  two  icon  images  using
>DPaint  II.   I  save these images as brushes. Next I use the Brush2Icon
>program to make a Disk1.info and Disk2.info. Finally I use IconMerge  to
>put  the  two together to a Disk.info file.

Brush2Icon does not create a "disk" type icon.  Click on it once, then
select Info from Workbench's menu and you will see what type of icon it
is.  You can use the SIT program from Fish disk #137 to Set Icon Type to
type "disk".  Pop the disk out of the drive, then Workbench will recognize
it the next time the disk is inserted.
 
-- 
Joe Smith (408)922-6220 | jms@antares.Tymnet.COM or jms@opus.Tymnet.COM
McDonnell Douglas FSCO  | UUCP: ...!{ames,pyramid}!oliveb!tymix!antares!jms
PO Box 49019, MS-D21    | PDP-10:JMS@F74.Tymnet.COM  CA license plate:"POPJ P,"
San Jose, CA 95161-9019 | narrator.device: "I didn't say that, my Amiga did!"