Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!UIAMVS.BITNET!AWCTTYPA From: AWCTTYPA@UIAMVS.BITNET ("David A. Lyons") Newsgroups: comp.sys.apple Subject: Mac and GS sounds Message-ID: <8902270353.aa06297@SMOKE.BRL.MIL> Date: 27 Feb 89 09:53:42 GMT Sender: usenet@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 38 X-Unparsable-Date: Sunday 26 Feb 89 2:54 PM CT >Date: Sat, 25 Feb 89 17:16:46 GMT >From: Kareth >Subject: Sound Files. Mac -> GS? >It seems to me that I recall someone who said sound files from the Mac use >the same format as the gs, so porting sound from the Mac to GS would be >possible. Anybody have any info, knowledge, or just plain cold hard facts >about this? On format that is sometimes used on both machines is just a plain sequence of uncompressed bytes, from 1 to 255. That format is no problem--I've moved sounds between systems before. (Just from Mac to GS, I guess, but the other direction shouldn't be much harder.) There are a variety of more compact formats for both machines... probably the easiest thing would be to get a sound unpacked into the most straightforward form before trying to convert it. >Also, has anyone heard about a sound cda that plays sounds at >certain times, like when you insert/eject a disk, make an error? The Mac >has some nice cda's that allow ya to configure the machine with about 10+ >different sounds for different functions. I've seen that (SoundMaster) on the Mac, but I haven't heard of any similar utilities on the GS. (There's a SysBeep utility that just replaces teh standard beep, though.) For technical reasons (mostly because many pieces of the toolbox are in RAM on the GS and therefore don't have permanent addresses), it's harder to write such a utility for the GS. I'm not saying it can't be done...it would be an interesting project. >kareth. >asd@mace.cc.purdue.edu --David A. Lyons bitnet: awcttypa@uiamvs DAL Systems CompuServe: 72177,3233 P.O. Box 287 GEnie mail: D.LYONS2 North Liberty, IA 52317 AppleLinkPE: Dave Lyons