Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!pasteur!ucbvax!hplabs!hp-sdd!megatek!spot!hollen
From: hollen@spot.megatek.uucp (Dion Hollenbeck)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Need good reference for segment:offset addressing in 80x86
Message-ID: <494@megatek.UUCP>
Date: 16 Feb 89 16:09:35 GMT
References: <6615@siemens.UUCP>
Sender: news@megatek.UUCP
Distribution: na
Lines: 22

From article <6615@siemens.UUCP>, by jrv@siemens.UUCP (James R Vallino):
> Someone I know is just beginning to do some lower level programming on a PC.  I
> am looking for references which describe the segment:offset in the 80x86 family
> processors.  I learned this so long ago I can't remember the reference I used
> or if I picked it up on the fly.
> 
Try this:
	
	INTEL iAPX 86/88, 186/188 User's Manual, Programmer's reference
	order Number: 210911-001

You can get this through any reputable electronics supply house which
handles INTEL chips.  Since I work for a firm which uses chips, we
get all these sort of manuals for free.  There may be other books
which give more examples or verbage, but if you want the ABSOLUTE
last word in accurate information, this is it.

	Dion Hollenbeck             (619) 455-5590 x2814
	Megatek Corporation, 9645 Scranton Road, San Diego, CA  92121

                                seismo!s3sun!megatek!hollen
                                ames!scubed/