Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!uwmcsd1!mrsvr!ssa
From: ssa@mrsvr.UUCP (Shahrooz S. Alavi)
Newsgroups: comp.sys.ibm.pc
Subject: Re: A couple of AT&T PC6300 questions
Message-ID: <649@mrsvr.UUCP>
Date: 17 Feb 89 15:44:06 GMT
References: <3001@homxb.ATT.COM>
Distribution: na
Organization: GE Medical, MR Center, Milwaukee
Lines: 25

From article <3001@homxb.ATT.COM>, by rry@homxb.ATT.COM (R.YADAVALLI):
> Hello,
> 
>                             ..       Is it correct to assume that by 
> replacing the existing 64K chips with 256K ones I could expand the memory to
> 640KB, possibly 1MB?  Any problems to look out for?
> 

	If you have a dual floppy 6300 you are in luck, because one of the
	banks of memory is socketed.  Otherwise you need to desolder 18
	chips. in either one of the memory banks. (but only one). Maximum
	memory you can have on the 6300 motherboard is 640k (one bank of
	64k chips, and one bank of 256k chips)

	good luck

   =======================================================================

         /         /| |   |\ \   | |
        /__       /_| |   |_\ \  | |     ...att!uwmcsd1!mrsvr!ssa
          /      /  | |   |  \ \ | |        (414) 547-9429
         / o    /   | |__ |   \ \| |        (414) 521-6607 (work)

   =======================================================================