Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!apple!oliveb!pyramid!prls!philabs!linus!mbunix!efv
From: efv@mbunix.mitre.org (Eugene F. Vogt)
Newsgroups: comp.sys.ibm.pc
Subject: NCSA Telnet V2.2. on PS/2
Keywords: NCSA, TELNET, 3COM, PS/2, MCA
Message-ID: <45178@linus.UUCP>
Date: 22 Feb 89 20:27:35 GMT
Sender: news@linus.UUCP
Reply-To: efv@mbunix (Vogt)
Organization: The MITRE Corporation, Bedford, Mass.
Lines: 61


To Hanno, or anyone else who knows the answer;

You posted an article a long time back, and I was wondering if you got
any response to your question........

------------Included file--------------
Article 22040 of comp.sys.ibm.pc:
Path: linus!husc6!bloom-beacon!apple!bionet!ig!agate!ucbvax!decwrl!sun!pitstop!sundc!seismo!uunet!mcvax!enea!tut!hannu
From: hannu@tut.FI (Hannu Koivisto)
Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.sys.ibm.pc
Subject: NCSA telnet 2.2 on ibm PS/70 (problems)
Message-ID: <158@karhu.tut.FI>
Date: 14 Sep 88 09:25:47 GMT
Organization: Tampere University of Technology, Finland
Lines: 22
Xref: linus comp.protocols.tcp-ip.ibmpc:1018 comp.sys.ibm.pc:22040


We have tried to install the new version of NCSA Telnet (2.2)
both on IBM PS/70 and 80 with 3c523 ethernet card. We use DOS 3.3
The doc's says that it should work.

We have tried a lot of different settings in Config.tel. No success,
the program reads the configuration file and halts the machine.

I would like to hear if somebody of you in the netland has made it to
work, or if it's known that it won't work.

If you have a working installation, can you please mail me a copy of
your Config.tel file (and maybe also config.sys).

Thanks in advance

------------------------------------------------------------------------
Hannu Koivisto		hannu@tut.fi            (internet -style address)
			koivisto@fintuta.bitnet (also via bitnet)

			Tampere University of Technology, Tampere, Finland
------------------------------------------------------------------------

------------End of included file-------------------

I saved your message, because I was planning on ordering NCSA Telnet
V2.2 for my PS/2 model 50.  I've got a 3COM 3c523 board in the box,
and the 3COM TCP software works.

I finally got my V2.2 software and manual, and guess what!  It hangs,
just like you describe!

Did you ever figure it out?

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
      >>---> Eugene F. Vogt   (efv@security) <---<<
-----------------------------------------------------------
    arpa: efv@mitre.org     |   US Mail: MITRE Corp.
MCI Mail: evogt (201-6274)  |            Mail Stop K329
     BIX: genevogt          |            Burlington Road
EasyLink: 62930778          |            Bedford, MA 01730
    UUCP: linus!mbunix!efv  |   Ma Bell: 617-271-8886
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-