Xref: utzoo comp.os.os9:388 comp.sys.m6809:1011 Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!husc6!psuvax1!psuvm.bitnet!rsm105 From: RSM105@PSUVM.BITNET Newsgroups: comp.os.os9,comp.sys.m6809 Subject: I can't make the connection!! Message-ID: <72683RSM105@PSUVM> Date: 21 Feb 89 22:45:52 GMT Lines: 17 From: (R. Moore) I'm appealing to the masses for some help! I have a COCO 3 with a J&M dis k controller. The problem I'm experiencing is that I can't get any output on m y Epson RX-80 printer when I connect it to the parallel printer port on the con troller. It works fine when connected to the serial port (with a serial/parale l converter). I checked the schematics for both the controller and the printer , and it seems that perhaps the right signals aren't going to the right place. In any case, I can't make any headway in correcting the situation. Does anyone have any ideas/suggestions? Thanks in advance!! ------- RON MOORE (RSM105@PSUVM.BITNET) 16 ATHERTON HALL UNIVERSITY PARK, PA 16802 << IMAGINATION IS MORE IMPORTANT THAN KNOWLEDGE. - A. EINSTEIN >>