Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!bbn!apple!well!svc
From: svc@well.UUCP (Software Ventures Corp.)
Newsgroups: comp.sys.mac
Subject: Re: LS Pascal <--> Radius Interference causes crash
Summary: LSP<->Radius Known Bug
Keywords: Init's, crashing
Message-ID: <10788@well.UUCP>
Date: 20 Feb 89 20:14:00 GMT
References: <13573@duke.cs.duke.edu>
Lines: 21

In article <13573@duke.cs.duke.edu>, lsn@romeo.cs.duke.edu (Lars S. Nyland) writes:
> 
> Using LightSpeed pascal (v 2.0), I found that my machine would hang
> (wristwatch never go away, menu header never unhighlighted, etc).  This
> was confusing, since it works so well on other macII's and se's around.
> 
> [How he found the problem with the Radius II Init]
> 
> Anybody got suggestions on how to deal with this (other than avoiding the
> two at the same time)?
> 
	This problem is a known bug in LSP 2.0 and it only occurs if you
try to RUN a program which tries to put up a window/dialog.  LSP itself will
run just fine, and you can code/compile, etc. just don't try to run anything.
	What I do is just turn off the Radius INIT (from the Control Panel)
when I am going to be using LSP, reboot and then go coding.  When I am done
with LSP then I turn the INIT back on.  It's a 'hack' but it works.  Hopefully
Symantec/THINK will fix this shortly so I don't have to worry about it.

> I guess its time to throw out Radius' init.
	If you wish...