Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!mit-eddie!uw-beaver!rice!sun-spots-request
From: khai%amara.uucp@mailgw.cc.umich.edu (S. Khai Mong)
Newsgroups: comp.sys.sun
Subject: Hardware flow control under SunOS4.0 question
Message-ID: <8902071543.AA00634@amara.uucp>
Date: 15 Feb 89 20:01:27 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 11
Approved: Sun-Spots@rice.edu
Original-Date: Tue, 7 Feb 89 10:43:08 EST
X-Sun-Spots-Digest: Volume 7, Issue 157, message 1 of 21

SunOS 4.0 supports flow control for the serial ports.  The question is how
do I set up my systems such that flow control is always on by default,
such as for outgoing uucp calls, incomming dialups.

The only way I seem to be able to set the hardware flow control is from a
program using ioctl calls.  I assume that the hardware bits are reset when
your program terminates, so that it is useless for my purpose.

--
Sao Khai Mong:   Applied Dynamics, 3800 Stone School Road, Ann Arbor, Mi48108
(313)973-1300 (uunet|sharkey)!amara!khai  khai%amara.uucp@mailgw.cc.umich.edu