Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: roode%hydra.cf.uci.edu@orion.cf.uci.edu (Dana Roode)
Newsgroups: comp.sys.sun
Subject: Diskless 386i/150 Trap type 0xe
Message-ID: <8902081918.AA25936@hydra.cf.uci.edu>
Date: 16 Feb 89 01:04:45 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 26
Approved: Sun-Spots@rice.edu
Original-Date: Wed, 08 Feb 89 11:18:37 -0800
X-Sun-Spots-Digest: Volume 7, Issue 157, message 16 of 21

We have a diskless 386i/150 recently purchased being served off a /250.  I
set the systems up and all was working well until the owner of the /150
went to unlock his screen one day.  The system crashed, and while
rebooting died again.  The messages where something like this:

    trap type 0xe

    trap die pid 0, current prog is 'swapper'

    eip(fc087c41), eflags(10246), [register dump not recorded]

    SunOS rel DL386
    panic: page fault
    dumping to vp 0, offset 0
    double trap (type 14)

This problem was intermittent and we were able to get the system up on
occasion.  I called Sun and they had me send it in for warranty repair.

Now Sun has the system but can't make it fail - I have been encouraging
them to find out from the SunOS folks what 'trap type 0xe' means, but they
havent yet.  Does anyone out there know?

    Dana Roode
    Roode@orion.cf.uci.edu
    Bitnet: DFRoode@UCI