Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!husc6!rice!sun-spots-request
From: brad@nwc.arpa (Brad Clark)
Newsgroups: comp.sys.sun
Subject: Re: Diskless client under 4.0
Message-ID: <8902150049.AA00880@nwc3922.ARPA>
Date: 23 Feb 89 13:24:10 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Original-Date: Tue, 14 Feb 89 16:49:29 PST
X-Sun-Spots-Digest: Volume 7, Issue 169, message 3 of 12

>The client boots, but at the end of the boot sequence, it complains of
>NFS write error 13 several times and then comes up multiuser.

I had this problem when setting up a dataless 3/60 client. I solved it by
going into the /etc/exports file on the server and giving root privilege
access to the client that as going to mount the directory as swap space. I
then ran /usr/etc/exportfs -a.

	e.g. /home/swap -root=client3,access=client1:client2:client3

Don't forget that once a file system or any part thereof is exported, it
cannot be exported again. You might consider exporting all of /home.

Good luck,
Brad Clark   arpanet: clarkb@nwc.arpa