Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!hplabs!hpda!hpcuhb!hpsel1!campbelr
From: campbelr@hpsel1.HP.COM (Bob Campbell)
Newsgroups: comp.terminals
Subject: Re: HP 2392A Query String
Message-ID: <9350003@hpsel1.HP.COM>
Date: 22 Feb 89 19:00:56 GMT
References: <3309@uhccux.uhcc.hawaii.edu>
Organization: Hewlett Packard, Cupertino
Lines: 20

Well, if you don't have the manual on you the net is always a good
place to start :-)

Page 7-2 of the HP 2392A brick gives:

Terminal ID Status

You request the terminal ID status by issuing the following escape sequence:

               <esc>*s^

The terminal responds by sending back the five-character string defined in
the Terminal ID field in the terminal configuration menu.  The default
value is "2392A".

Hope this helps . . .

Bob Campbell                Some times I wish that I could stop you from 
campbelr@hpda.hp.com        talking, when I hear the silly things you say.
Hewlett Packard                                    - Elvis Costello