Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!bionet!csd4.milw.wisc.edu!leah!rpi!batcomputer!cornell!rochester!pt.cs.cmu.edu!cadre!pitt!amanue!oglvee!jr From: jr@oglvee.UUCP (Jim Rosenberg) Newsgroups: comp.unix.wizards Subject: Re: UNIX-PC to VAX to SUN Keywords: telnet, cu, kermit Message-ID: <467@oglvee.UUCP> Date: 11 Feb 89 01:01:39 GMT References: <236@bcscal.UUCP> Reply-To: jr@.UUCP (Jim Rosenberg) Organization: Oglevee Computer Systems, Connellsville, Pa Lines: 21 In article <236@bcscal.UUCP> phil@bcscal.UUCP (Phil Kemp) writes: >I am using a UNIX-PC connected to a VAX as a terminal, via a hardwire >connection to a multiplexor, and then invoking telnet to log in to a SUN >attached to a TCP/IP network linking everthing together. ( except my PC ) > >The problem I'm having is that while I can do file transfers via kermit >to the VAX with no problem, [...] >Kermit will simply not work Did you try setting explicit parity on Kermit for both the VAX and Sun?? I haven't tried this particular combination, but based on net recommendations when I find Kermits that don't wanna talk I try set parity even on each end and that usually works. -- Jim Rosenberg pitt Oglevee Computer Systems >--!amanue!oglvee!jr 151 Oglevee Lane cgh Connellsville, PA 15425 #include