Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!sun!pitstop!sundc!seismo!uunet!mcvax!hp4nl!gouldnl!wimth
From: wimth@gouldnl.UUCP (Wim ten Have)
Newsgroups: comp.os.minix
Subject: HCJ-Kernel problems
Keywords: ST-kernel crashes.
Message-ID: <691@gouldnl.UUCP>
Date: 7 Mar 89 13:07:41 GMT
Reply-To: wimth@gouldnl.UUCP (Wim ten Have)
Organization: Gouldnl Dutch Unix Support Centre
Lines: 41


I've implemented the kernel as distributed by HCJ last week. The Parts
were all perfectly readable and patcheble. So a new kernel was build
within 4 hours. What I did was the following:

	- I took the generic sources for the kernel
	- extracted all diff files from the distribution.
	- patched the sources by using patch.
	- compiled every-thing with the following switches.

	HAVERS232
	HAVEMIDI
	HAVEMOUSE
	HAVELOCAL
	HAVEDISKROOT
	HAVEFLOPPPY	(New floppy driver).

The new kernel generated had a loadable image of size 194000Bytes!!!!
But I was able to boot it. Also the new distribution of cu.tar was compiled
and did run.

Here are some of my problems.
I can only run cu once (without a problem), the second atthempt does cause
al sorts of panics:

	- File system panic: clock_time err 6
	- File system panic: receive error.
	- File system panic: ??????, etc.

Does anyone know how to go further. (I had everything installed before
without a problem, also the kernel size I had here was smaller 158000Bytes.

	*HELP*	*HELP*	*HELP*	*HELP* *HELP*	*HELP*	*HELP*	*HELP*

| Wim ten Have                            ...!hp4nl!gouldnl!whave |
| Gould Holland                                whave@gouldnl.uucp |
| Maarssenbroek, The Netherlands          (USA)   ...!gould!whave |
-- 
| Wim ten Have                            ...!hp4nl!gouldnl!whave |
| Gould Holland                                whave@gouldnl.uucp |
| Maarssenbroek, The Netherlands          (USA)   ...!gould!whave |