Path: utzoo!censor!hugh
From: hugh@censor.UUCP (Hugh D. Gamble)
Newsgroups: comp.sys.amiga
Subject: Re: Help with AUX and terminal
Summary: other AUX: handlers
Message-ID: <373@censor.UUCP>
Date: 2 Mar 89 04:25:53 GMT
References: <2030160@hpcilzb.HP.COM>
Organization: Bell Canada, Business Development, Toronto
Lines: 26

In article <2030160@hpcilzb.HP.COM>, daves@hpcilzb.HP.COM (Dave Scroggins) writes:
... 
> I tried to hook a terminal up to the serial port and run it through
> the AUX device. I know the terminal works because I can use it with a HAYES
> modem with no problems. (Also the cables are good.) I can also use the
> modem with the AMIGA through the serial port.
> 
> I make sure the AUX is mounted, then type, "newcli AUX:" as it says in the
> 1.3 manual. I make sure the baud rates and such is set right.
> 
> But nothing happens with the terminal. No commands entered, no echo, Zip!
... 
> Dave S.

Try using a replacement AUX: handler.  The one I'm using right now, I
got for use with Harald Koch's UUCP and is (or is based on) one that
was posted to the net a while back by Steve Drew.  It works better
than the standard 1.3 handler for just such stuff as running a cli
from a terminal.

I hope that suggestion has at least some relevance to your problem.

-- 
Hugh D. Gamble  (416) 581-4354  {lsuc, utzoo}!censor!hugh  (Std. Disclaimers)
I don't want to live in a beer commercial,
I just want to play with some of the girls from one. :^)