Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!purdue!decwrl!sun!pitstop!sundc!seismo!uunet!tektronix!percival!parsely!agora!billsey
From: billsey@agora.UUCP (Bill Seymour)
Newsgroups: comp.sys.amiga
Subject: Re: Appletalk
Message-ID: <1396@agora.UUCP>
Date: 4 Mar 89 02:58:12 GMT
References: <EXyYHxy00WB-0DCm57@andrew.cmu.edu:
Organization: Advanced Solutions, Hillsboro, OR
Lines: 22

From article <EXyYHxy00WB-0DCm57@andrew.cmu.edu:, by es2e+@andrew.cmu.edu (Edwin T. Smith):
: Ok, I don't know if this conversation has happened already here, but here goes:
:   APPLETALK on the amiga: Can it be done?  If so, has it?
: 
: I understand that the computer interface to the net is RS-422.  In that case,
: is it possible to modify -232 signals for -422?  Will ASDG's IO board
: be supporting rs-422?  Any comments and suggestions are welcome here
: or to me privately.

	I don't want to spend too much time on the net with possibly commercial
type messages, but Creative Microsystems is announcing a multiport card at
AmiEXPO this weekend. There is one parallel port, one serial (RS-232) port
and one Appletalk (RS-422) port. In conjunction with this, there is Appletalk
software also... After Rich and Mark get back from the show, I'll try to post
the flier on the card. 

: - Ed      (Ed Smith: es2e+@andrew.cmu.edu)
-- 
     -Bill Seymour             ...tektronix!reed!percival!agora!billsey
                               ...tektronix!sequent!blowpig!billsey
     Creative Microsystems   Northwest Amiga Group    At Home Sometimes
     (503) 691-2552          (503) 656-7393 BBS       (503) 640-0842