Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!bloom-beacon!apple!amdahl!pccuts!acs From: acs@pccuts.pcc.amdahl.com (Tony Sumrall) Newsgroups: comp.sys.amiga Subject: Re: VT100 profile questions Message-ID: <769@pccuts.pcc.amdahl.com> Date: 9 Mar 89 04:54:13 GMT References: <10354@louie.udel.EDU> <6900@phoenix.Princeton.EDU> Reply-To: acs@pccuts.pcc.amdahl.com (Tony Sumrall) Distribution: na Organization: Amdahl Corporation, Sunnyvale CA Lines: 22 In article <6900@phoenix.Princeton.EDU> kpmancus@phoenix.Princeton.EDU (Keith P. Mancus) writes: } } As long as we're on the subject: I would like to be able }to run VT100 at 19200 or faster with a null modem cable. VT100 2.7 }does not accept this in the profile, nor is there a menu for it. }Can I just change the code selecting baud rate and recompile, }or was this deliberately omitted because the machine cannot keep }up with it? It was (and still is) deliberately omitted. The reason? I don't have access to anything over 2400 baud (yet). I assumed that it would work at 9600 baud. If you want to put in the menu selection and give it a try, be my guest. Please send me e-mail detailing the outcome. If it works I'll include 19.2K support in version 2.9. }-Keith Mancus <- preferred } -- Tony Sumrall acs@pccuts.pcc.amdahl.com <=> amdahl!pccuts!acs [ Opinions expressed herein are the author's and should not be construed to reflect the views of Amdahl Corp. ]