Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!eris.berkeley.edu!mwm
From: mwm@eris.berkeley.edu (Mike (I'll think of something yet) Meyer)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Trailblazer 19200 modem
Message-ID: <21093@agate.BERKELEY.EDU>
Date: 3 Mar 89 00:44:35 GMT
References: <12543@gryphon.COM>
Sender: usenet@agate.BERKELEY.EDU
Organization: Missionaria Phonibalonica
Lines: 23

In article <12543@gryphon.COM> ddave@pnet02.cts.com (David Donley) writes:
<What type of special stuff do you need to do to be able to use a Trailblazer
<19200 baud modem?

Nothing. I've been running with one for nearly a year. Kermit at 19.2
with both modems in kermit mode moves a lot of data quickly.

The one thing to watch out for:

If you lock the modem<->terminal interface at speeds less than 19.2
(say, 9600), you will sometimes have problems with handshaking when
the modem is trying to run at 19.2 in interactive mode.

I have as yet to try it running uucp (my uucp connections use there
Trailblazers for SLIP), or SLIP.

	<mike

--
How many times do you have to fall			Mike Meyer
While people stand there gawking?			mwm@berkeley.edu
How many times do you have to fall			ucbvax!mwm
Before you end up walking?				mwm@ucbjade.BITNET