Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!bloom-beacon!apple!oliveb!amdahl!pccuts!acs
From: acs@pccuts.pcc.amdahl.com (Tony Sumrall)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Predicting Key Scan Codes (a la DME)
Keywords: RAWKEYS, Scan Codes, Key Pad
Message-ID: <767@pccuts.pcc.amdahl.com>
Date: 7 Mar 89 04:07:25 GMT
References: <6597@ecsvax.UUCP> <107@amiga.UUCP>
Reply-To: acs@pccuts.pcc.amdahl.com (Tony Sumrall)
Organization: Amdahl Corporation, Sunnyvale CA
Lines: 21

In article <107@amiga.UUCP> kodiak@tooter.UUCP (Robert R. Burns) writes:
:Actually, the keys on the numeric pad new for the 500/2000, i.e.  ()/*+
:don't even have this NUMERICPAD bit set.  (They will for 1.4, but that's
:a small consolation)
:
:Solution: hard code it (shudder!).

Has *no one* produced a keymap for the 2000 that has the NUMERICPAD bit
set?

I don't mean to rattle C-A's cage but you talk about unsupported
programming practices!  And forced on us by C-A, no less!  Ah well, at
least I don't have to program a segmented architecture machine.

:--
:Bob Burns, amiga!kodiak
-- 
Tony Sumrall acs@pccuts.pcc.amdahl.com <=> amdahl!pccuts!acs

[ Opinions expressed herein are the author's and should not be construed
  to reflect the views of Amdahl Corp. ]