Path: utzoo!attcan!uunet!lll-winken!xanth!nic.MR.NET!csd4.milw.wisc.edu!bbn!oberon!polyslo!jearls From: jearls@polyslo.CalPoly.EDU (Johnson Michael Earls) Newsgroups: comp.sys.apple Subject: Re: Proterm Message-ID: <8706@polyslo.CalPoly.EDU> Date: 1 Mar 89 15:58:24 GMT References: Reply-To: jearls@polyslo.CalPoly.EDU (Johnson Michael Earls) Organization: Cal Poly State University -- San Luis Obispo Lines: 24 In article jm7e+@ANDREW.CMU.EDU ("Jeremy G. Mereness") writes: > >I guess the sum of the problem is that the VT100 emulation sometimes >sticks in extra linefeeds in programs that use the full screen and menus. > The VT100 emulation will do an automatic linefeed whenever text is printed in the 80th column. This causes problems, becuase a "real" VT100 doesn't do any automatic linefeeds; it only linefeeds when it gets the linefeed character. > >The control panel (if Proterm doesn't defeat it) is set to 19200 baud and >defeat first linefeed after CR; everything else is standard. > The control panel settings are the "defaults" for the ports; that is what they are set to on a cold-start. ProTERM will set the ports to whatever settings you give in the "Online Parameters" dialog. Hope this helps... ___________________________________________________________ (~~~~) / \ ( 0 0 ) | Johnson Earls - jearls@polyslo.CalPoly.EDU | (| > |) ___/ - jearls@polyslo.UUCP | ( \__/ ) <___ - ..!ucbvax!voder!polyslo!jearls | (____) \_____________________________________________________________/