Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!ucsd!sdcc6!sdcc13!ln63wzb
From: ln63wzb@sdcc13.ucsd.EDU (Mike Sanford [TA])
Newsgroups: comp.sys.atari.8bit
Subject: Re: how do i transfer Atari 800 files to a IBM PC
Keywords: transfer, files, ibm
Message-ID: <1113@sdcc13.ucsd.EDU>
Date: 6 Mar 89 01:45:03 GMT
References: <Mar.4.17.53.06.1989.11671@topaz.rutgers.edu>
Reply-To: ln63wzb@sdcc13.ucsd.edu.UUCP (Mike Sanford [TA])
Organization: Univ. of California, San Diego
Lines: 27

In article <Mar.4.17.53.06.1989.11671@topaz.rutgers.edu> spl@topaz.rutgers.edu (Lesniewski) writes:
>
> Message summary:
> How can I xfer files to my IBM pc without writing a program.
> I have Amodem
>
>- Thanx to whoever may solve my problem
>  Stephen Lesniewski
>    spl@topaz.rutgers.edu
>    LESNIEWSKI@CANCER
Well, If you have a copy of amodem, you can use a program on the PC
like procomm, mirror, or crosstalk.  To connect the computers
together, use a modem cable(like the one that you have from your 850
to your serial modem) and reverse the connection on the RS232 side
of pins 2 and 3 and you can hook it directly to the back of the IBM
You can then modify the Amodem program to work at 19200 baud and voila,
you can transfer the programs. Look for the XIO 36 (I think that was
the number) commands.
			Hope that make sense and works,
			Mike
______________________________________________________________________________
Mike Sanford          (619) 534-4870   |Internet:    sanford@ssurf.ucsd.edu
Scripps Inst. of Oceanography, U.C.S.D.|BITnet:      msanford@ucsd.bitnet
A-030-SSURF                            |UUCP:        ...!ucsd!ssurf!sanford
La Jolla, CA 92093   USA               |SPAN/DECnet: SSURF::SANFORD
_______________________________________|______________________________________
              Why do you park on a driveway and drive on a parkway?