Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!labrea!lindy!news From: BL.JPL@forsythe.stanford.edu (Jonathan Lavigne) Newsgroups: comp.sys.ibm.pc Subject: Re: DOS <-> CP/M Message-ID: <2268@lindy.Stanford.EDU> Date: 4 Mar 89 08:25:07 GMT Sender: news@lindy.Stanford.EDU Distribution: usa Lines: 30 In article , dd26+@andrew.cmu.edu (Douglas F. DeJulio) writes: >I'm looking for this too -- but a little different. I need to >transfer files back and forth between a PC and an Osbourne. I tried >the stuff at Simtel20, and it didn't seem to work. Any pointers? A couple of years ago I bought a program called Media Master Plus that let me read Osborne disks on my Wyse AT. As I recall, it cost about $50.00. It seems to work quite well for reading disks, but I did have some problems trying to format Osborne single-sided 180K disk on my 1.2M drive (but maybe that's to be expected). The address in the documentation is: Intersecting Concepts 80 Long Ct. Suite 1A Thousand Oaks, CA 91360 (805) 373-3900 You might also want to try the original Osborne Users Group (FOG). They might be able to point you to some PD file transfer programs. Their address is: FOG P. O. Box 3474 Daly City, CA 94015-0474 I don't see any office phone number in their magazine. They have a BBS number (in Daly City, CA), which is 415-755-2030. You have to be a member to download software, but you may be able to leave a message without joining. Jonathan Lavigne BITNET: BL.JPL@RLG.STANFORD.EDU Research Libraries Group Stanford University