Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!bellcore!faline!thumper!gamma!mibte!jbh
From: jbh@mibte.UUCP (James Harvey)
Newsgroups: comp.sys.ibm.pc
Subject: Help needed
Keywords: PC, Memory Expansion
Message-ID: <2774@mibte.UUCP>
Date: 5 Mar 89 21:14:18 GMT
Distribution: na
Organization: Michigan Bell Telephone Company
Lines: 26

At a recent Ham Flea Market I picked up an older memory expansion
board that looks like it will be usable to up my PC from 512k to
640K.  Now this board only cost me three bucks but for that price
there, of course, were no instructions.  The board is marked
"Little Red", it has four rows of memory chip sockets, and a nine
pin DIP switch.  The manual for my computer says the start address 
for any RAM espansion must be $80000.  Could some kind soul out 
there who has seen one of these PLEASE E-Mail me some hints on how 
to set these DIP switches?

Jim Harvey                        |      "Ask not for whom the bell
Michigan Bell Telephone           |      tolls and you will only pay
29777 Telegraph                   |      Station-to-Station rates."
Southfield, Mich. 48034           | 

ulysses!gamma!mibte!jbh
     
-- 

Jim Harvey                        |      "Ask not for whom the bell
Michigan Bell Telephone           |      tolls and you will only pay
29777 Telegraph                   |      Station-to-Station rates."
Southfield, Mich. 48034           | 

ulysses!gamma!mibte!jbh