Path: utzoo!yunexus!torsqnt!dptcdc!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!aramis.rutgers.edu!paul.rutgers.edu!hundt From: hundt@paul.rutgers.edu (Thomas M. Hundt) Newsgroups: comp.sys.ibm.pc Subject: VGA display technical specs wanted Keywords: scan frequencies, etc. Message-ID: Date: 8 Mar 89 18:06:12 GMT Article-I.D.: paul.Mar.8.13.06.12.1989.28589 Organization: Rutgers Univ., New Brunswick, N.J. Lines: 20 Hi, I'm trying to evaluate a nonstandard monitor to see if it could possibly work as a VGA one. I need the exact scanning frequencies (horizontal is ~31 kHz I believe, and the vertical is 60 or 70 Hz?) Also if somebody knows the voltage ranges on the RGB drive lines. (0-1V?) (These aren't as important as they can be fudged pretty easily.) Anything else I should know? As far as I am aware, VGA always runs at the same frequencies, unlike EGA which physically emulates CGA and Mono boards and their signals. Thanks -- w ["] | Thomas M. Hundt :: hundt@occlusal.rutgers.edu | |__'_ | Gradual Student :: Electrical & Computer Eng. | H \/| Rutgers University :: 201/932-5843 | X | 272 Hamilton St. #96 :: 201/247-6723 | _/ \_ | New Brunswick, NJ 08901 "Limit guns not speed" |