Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!marquis@qal.qal.berkeley.edu
From: marquis@qal.qal.berkeley.edu (Roger Marquis)
Newsgroups: comp.sys.ibm.pc
Subject: Port address problem on an AT
Message-ID: <21408@agate.BERKELEY.EDU>
Date: 10 Mar 89 01:41:29 GMT
Sender: usenet@agate.BERKELEY.EDU
Organization: University of California, Berkeley
Lines: 9


  My recently purchased bus modem is installed on com4 as I already have
a com1-3.  The problem is that the Sidekick dialer will only talk to
com1 or com2.  Is there 1) a way to readdress com2 to com4, 2) patch
sidekick to use com4 or, 3) install this Everex bus modem on com2
without taking out a serial port?
   
    Thanks,
      Roger Marquis   (marquis@ucbqal.bitnet)