Path: utzoo!attcan!uunet!lll-winken!xanth!nic.MR.NET!hal!cwjcc!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: mcvax!cgch!wwtz@uunet.uu.net (Wolfgang Wetz)
Newsgroups: comp.sys.sun
Subject: Re: ie0: lost interrupt: resetting
Message-ID: <787@cgch.UUCP>
Date: 1 Mar 89 18:22:39 GMT
References: <8902080633.AA07926@oce.orst.edu>
Sender: usenet@rice.edu
Organization: CIBA-GEIGY AG, FO/WIRZ/WRZ, CH-4002 Basle, Switzerland
Lines: 18
Approved: Sun-Spots@rice.edu
Original-Date: 17 Feb 89 14:24:18 GMT
X-Sun-Spots-Digest: Volume 7, Issue 176, message 2 of 12
X-Issue-Reference: v7n157

rudolf@oce.orst.edu (Jim Rudolf) writes:
>We have two 3/280 servers running SunOS 3.5.  Almost on a weekly basis,
>usually during a period of moderate net activity, one of the servers will
>start spewing forth with:
>	ie0: lost interrupt: resetting

This is a problem which occurs during heavy load on the ethernet. We
experienced this problem here too.  The bad thing about this "interrupt
lost" is, that there is no way to recover from, except processor
interrupt/reboot.  We were told by Sun Switzerland to upgrade to SunOS
3.5.1.  Having done this, the problem went away.

best regards
Wolfgang Wetz, Systems Administrator, Scientific Computing Centre
   c/o CIBA-GEIGY AG, R-1045.330, CH-4002 Basel, Switzerland
 Internet: wwtz%cgch.uucp@uunet.uu.net		      Amateur Radio: HB9PCX
 UUCP:     ...!mcvax!cernvax!cgch!wwtz                Phone: (+41) 61 697 54 25
 BITNET:   wwtz%cgch.uucp@cernvax.bitnet              Fax:   (+41) 61 697 32 88