Path: utzoo!attcan!uunet!mcvax!piet
From: piet@cwi.nl (Piet Beertema)
Newsgroups: comp.dcom.modems
Subject: Re: Using Telebits on International Calls
Message-ID: <845@sering.cwi.nl>
Date: 20 Mar 89 20:08:25 GMT
References: <404@nytim.UUCP>
Organization: CWI, Amsterdam
Lines: 19


	Watching the lights, it *looks* like there are 7 exchanges then
	a significant (1-3 seconds) pause before communications continues.
	Has anyone seen similar performance
Yes.
	and fixed the problem ?
yes: go back to 3.0 software level.

	Both telebits are using version 4.00 ROMs
The problem is in 4.0; and you can *hear* it going wrong:
first give "atm2" to constantly enable the speaker, then
set up the connection by hand. And then listen to the
endless retrains/renegotiates of the modems trying to get
"in sync" again; those are the pauses you observe.

-- 
Opinions expressed above reflect those of my employer, except when they don't.

	Piet Beertema, CWI, Amsterdam	(piet@cwi.nl)