Xref: utzoo comp.misc:5516 comp.sources.wanted:6703
Path: utzoo!attcan!uunet!mcvax!ukc!pyrltd!lucifer!rob
From: rob@lucifer.UUCP ( 237 )
Newsgroups: comp.misc,comp.sources.wanted
Subject: Information on UniWare cross assemblers wanted
Message-ID: <45@lucifer.UUCP>
Date: 15 Mar 89 09:33:33 GMT
Reply-To: rob@lucifer.UUCP (Rob Clive)
Followup-To: comp.misc
Organization: Lucas Diesel Systems, Phoenix Way, Cirencester, Glos, UK
Lines: 19

Has anyone had any experience of writing their own object file formatters 
for the UniWare cross assemblers by Software Development Systems, Inc. of
Downers Grove, Illinois?  

If you need to write your own formatter then SDS supply a ready compiled
interface module to which you are supposed to link your own formatting
routines (they even supply sample routines).  However, whilst I can link
OK an attempt to run the linked program results in a complaint that the
object file named on the command line 'cannot be opened'.  This occurs even
with the unmodified sample routines!  Before anyone asks the object file
is present and has the correct permissions.  Indeed, this same file is
correctly formatted by all of the other SDS supplied formatters.

If anyone has any ideas or better still if SDS are on the net please email
me.  Thanks.
----------
Rob Clive.					UUCP:	mcvax!ukc!lucifer!rob
Lucas Diesel Systems, Cirencester	 Most others:	rob%lucifer@ukc.ac.uk
Gloucestershire, GL7 1QG, UK.				      Now read on....