Path: utzoo!attcan!uunet!amdahl!ames!pasteur!ucbvax!UX1.LBL.GOV!ren
From: ren@UX1.LBL.GOV
Newsgroups: comp.protocols.appletalk
Subject: (none)
Message-ID: <8903102154.AA00817@ux1.lbl.gov>
Date: 10 Mar 89 21:54:05 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 54

Subject: aufs under SUNOS 4.01

I am attempting to get the CAP5 atis/aufs running on
our Sun 3/280 running 4.01 via a FastPath-4 running v4.1
proms and the KIP 0688 code.

Our /etc/services file does not contain the new range
of UDP ports starting at 200.  The old mappings (based
on 768) are being used by KIP. 

The CAP5 distribution with the above configuration runs just fine
under SUNOS 3.5.

I would appreciate any help, comments and/or suggestions as to what
to do to get aufs running under SUNOS 4.01.

Thanks in advance.

Bob Rendler				rerendler@lbl.gov
Lawrence Berkeley Laboratory
Berkeley, CA

***********************************************************************

When I start /etc/atis I get the logfile messages:

atis: Thu Mar  9 18:48:08 1989 Reply num max for lkup reply is 5 (based on 107)
atis: Thu Mar  9 18:48:09 1989 NIS: NIS socket not available: error -1: Address already in use
atis: Thu Mar  9 18:48:10 1989 pid = 3447

and atis continues to run.

***********************************************************************

atistest fails with the message:

nbp register error because: couldn't register name - is atis running?

***********************************************************************

aufs fails with the similar message:

00643* 18:17:18 03/07/89 SrvrRegister for oliver failed...

***********************************************************************

My atalk.local file is setup as follows:

# mynet mynode myzone
1.196 70 twilight
# bridgenet bridgenode bridgeIP
1.254 129 128.3.254.129

***********************************************************************