Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cwjcc!hal!nic.MR.NET!srcsip!herds!linde
From: linde@herds.SRC.Honeywell.COM (Larry G. Linde)
Newsgroups: comp.sys.apollo
Subject: Apollo questions (SLIP, UUCP, DN460, DN660, 9.7)
Message-ID: <18620@srcsip.UUCP>
Date: 13 Mar 89 18:19:23 GMT
Sender: news@src.honeywell.COM
Reply-To: linde@srcsip.UUCP ()
Distribution: na
Organization: Honeywell Systems & Research Center, MPLS, MN
Lines: 31

I have a few questions about apollo hw/sw

1: Does anyone have a SLIP for the apollo (dn460/660)
   running aegis 9.7.1 ?

2: I have a incomming UUCP link on the 460 which works fine.
   However if I use a outging link on sio for uucp traffic
   it will crash the system in a very short order < 2 min.
   tip works fine on this same port with no problems. 
   Any ideas?

3: Does anyone have both incomming (siologin) and outgoing (tip/uucp)
   running on the same line. ala bsd4.3

4: does anyone have a siologin replacement? (source code?)

5: additional serial ports, has anyone ever used a multibus
   serial card to add ports to a 460? device driver?

6: SCSI disk drives on a 460/660 Same question as #5.

7: IBM pc token ring cards? Do they exist, if so how much and where?

 thats enough for now.

 -larry

    Larry G. Linde Research Scientist   MN65-2300
    Signal and Image Processing         3660 Technology Drive      (612)
    Vision Systems Technology           Mpls, MN  55413      **     782-7589
    Honeywell Systems & Research Center