Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!purdue!decwrl!sun!pitstop!sundc!seismo!uunet!tektronix!percival!bucket!martyl
From: martyl@bucket.UUCP (Marty Lee)
Newsgroups: comp.sys.mac
Subject: Re: Torx Driver for the SE
Summary: Torx-15 driver available at NAPA
Message-ID: <1300@bucket.UUCP>
Date: 14 Mar 89 01:12:10 GMT
References: <71689@ti-csl.csc.ti.com> <28422@sri-unix.SRI.COM>
Organization: Rick's Home-Grown UNIX; Portland, OR.
Lines: 18

In article <28422@sri-unix.SRI.COM>, stores@unix.SRI.COM (Matt Mora) writes:
> In article <71689@ti-csl.csc.ti.com> holland@m2.csc.ti.com (Fred Hollander) writes:
> >
> >Does anyone know of a computer store, hobby shop or mail-order house
> >that sells the Torx-15 driver required to open the SE?  I've check the
> >hardware stores but, I can't find one 10" long.
> >


I got mine at the local NAPA auto parts store.  It was 12 or 15 inches though..
never had a problem with the deep inset screws of the newer mac SEs.

Marty Lee
              teksce           (Fastest path)
          /            \
tektronix!reed!  omen   !bucket!martyl  (Marty Lee)
              \        /
               percival