Path: utzoo!attcan!uunet!mcvax!unido!nixctc!sun360.Online.Nixdorf.De!pete From: pete@sun360.Online.Nixdorf.De (pete delany) Newsgroups: comp.sys.pyramid Subject: Re: X Window System on Pyramid (?) Message-ID: <1022@nixctc.DE> Date: 19 Mar 89 18:16:56 GMT References: <14298@bellcore.bellcore.com> Sender: news@nixctc.DE Lines: 27 In article , hedrick@geneva.rutgers.edu (Charles Hedrick) writes: > Path: nixctc!unido!mcvax!uunet!lll-winken!ames!mailrus!nrl-cmf!ukma!rutgers!aramis.rutgers.edu!geneva.rutgers.edu!hedrick > From: hedrick@geneva.rutgers.edu (Charles Hedrick) > Newsgroups: comp.sys.pyramid > Subject: Re: X Window System on Pyramid (?) > Message-ID: > Date: 26 Feb 89 01:57:24 GMT > References: <14298@bellcore.bellcore.com> > Organization: Rutgers Univ., New Brunswick, N.J. > Lines: 3 > Posted: Sun Feb 26 02:57:24 1989 > > We run X11r3 client stuff on a Pyramid. I don't think anything > special was done to get it to build. If you run into trouble, I'll > forward questions to our X maintainer. I'm having a few problems with a few client applications porting. Is the OSX 4.1 cmpiler ok or should I use the new OSX 4.4 compiler. I recall that the 4.1 compiler has a problem with using the argument 'IN' registers as scratch registers. Pete Delaney - Nixdorf UCC | pete@NIXCTC.DE Prefered Addr Loffel Strasse 3 | pyramid!nixctc!pete UUCP from Calf 7000 Stuttgart 70 | pete@RELAY.HUJI.AC.IL Backup Address West Germany | Phone: +49 (711) 7685-128