Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!husc6!rice!sun-spots-request
From: polygen!stern@eddie.mit.edu (Hal Stern)
Newsgroups: comp.sys.sun
Subject: Help With TrailBlazer + on Sun 3/160
Keywords: Hardware
Message-ID: <183@bogart.UUCP>
Date: 14 Mar 89 06:31:50 GMT
Sender: usenet@rice.edu
Organization: Polygen Corporation, Waltham, MA
Lines: 35
Approved: Sun-Spots@rice.edu
Original-Date: 1 Mar 89 23:09:07 GMT
X-Sun-Spots-Digest: Volume 7, Issue 196, message 12 of 16

i have a new trailblazer+ and have had quite a bit of trouble getting it
to run with uucp on a sun-3.

our hardware: sun 3/160, modem on serial port "a"
software: SunOS 3.2, but with 4.2-style uucp (hacked by Boston Univ
	for some local uucp protocols, don't ask why).

what works:
	- dial in/out at all speeds up to 19.2kb. i can dial
		all remote sites and get logged in

	- switching the same line between dial in/out

what doesn't work:
	when uucico dials a remote site, it dials without
	problem, but immediately produces
	root princeton () FAILED (ATDT1.....)

	HOWEVER - i see the login banner go by, and have
	seen the "CONNECTED" message from the modem. when
	listening to the modem, it sounds like it is
	connecting at high speed.

i can only assume that someone (uucico probably) doesn't like a return
code.  

any help is appreciated.  replies by mail, please.

--hal stern
  polygen corporation
  200 fifth avenue
  waltham, ma  02254
  (617) 890-2888

  {mit-eddie, bu-cs, princeton, sunne}!polygen!stern