Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: schultz@mmm.3m.uucp.com (John C Schultz) Newsgroups: comp.sys.sun Subject: 3/60 lockup under X11r2 Keywords: Hardware Message-ID: Date: 15 Mar 89 17:25:33 GMT Sender: usenet@rice.edu Organization: 3M Engineering Systems & Technology Lab, St. Paul MN Lines: 15 Approved: Sun-Spots@rice.edu Original-Date: 4 Mar 89 00:19:35 GMT X-Sun-Spots-Digest: Volume 7, Issue 200, message 6 of 16 We having been having intermittent problems with our diskless Sun 3/60s locking up after coming out of xlock under X11R2. The symptoms are that the 3/60 will unlock fine and you will be working. Suddenly the display will go black and nothing, including L1-a will get a response. You have to turn the power off and back on. I am not sure that this behaviour is related to xlock or even X11R2 since I seem to recall it happening under Sunview. It happens on a 3/60M and a 3/60C. Anyone seen similiar problems and have suggestions? -- john c. schultz schultz@3M.Com ..!uiucuxc!mmm!schultz (612) 733-4047 3M Center, Bldg 518-1-1, St. Paul, MN 55144-1000