Xref: utzoo comp.unix.xenix:5360 comp.unix.questions:12236 comp.unix.wizards:15069
Path: utzoo!attcan!uunet!ispi!jbayer
From: jbayer@ispi.UUCP (Jonathan Bayer)
Newsgroups: comp.unix.xenix,comp.unix.questions,comp.unix.wizards
Subject: Re: UUCP problem
Message-ID: <491@ispi.UUCP>
Date: 15 Mar 89 13:50:42 GMT
References: <483@ispi.UUCP> <609@g4lzv.co.uk>
Reply-To: jbayer@ispi.UUCP (Jonathan Bayer)
Organization: Intelligent Software Products, Inc.
Lines: 33

In article <609@g4lzv.co.uk> keith@g4lzv.co.uk (Keith Brazington) writes:
>In article <483@ispi.UUCP>, jbayer@ispi.UUCP (Jonathan Bayer) writes:
}} Permission file entry:
}} 
}} MACHINE=libcmp LOGNAME=libcmp \
}} 	COMMANDS=uucp:rmail \
}} 	READ=/usr/spool/uucppublic:/usr/tmp \
}} 	WRITE=/usr/spool/uucppublic:/usr/tmp \
}} 	SENDFILES=yes REQUEST=yes 
}} 
}} System file entry:
}} 
}} libcmp Never ACU 19200 p0000 ogin:--ogin:--ogin: nuucp
}
}The problem with this is the LOGNAME entry. It should be LOGNAME=nuucp
}assuming that the remote uses this as the login id to get into the system.
}Remember that MACHINE is the ID of the machine, and that LOGNAME is the ID used
}to gain access to uucico.
}
}Keith Brazington


That is not the problem since I had set up a special login id for use by
libcmp.  Amazingly enough, the login id was "libcmp"


JB

-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
19 Virginia Ave.				...uunet!ispi!jbayer
Rockville Centre, NY 11570  (516) 766-2867    jbayer@ispi.UUCP