Path: utzoo!attcan!uunet!sco!rosso
From: rosso@sco.COM (Ross Oliver)
Newsgroups: comp.unix.xenix
Subject: Re: Help -> modem problems
Keywords: Xenix 2.3, Modem, stty
Message-ID: <1886@viscous.sco.COM>
Date: 11 Mar 89 08:54:23 GMT
References: <84@althea.UUCP>
Reply-To: uunet!sco!rosso (Ross Oliver)
Organization: SCO Technical Support
Lines: 16

In article <84@althea.UUCP> eddjp@althea.UUCP (Dewey Paciaffi) writes:
>I just reinstalled my xenix, to 2.3. I was running 2.2.2 and my Hayes
>SmartModem 2400B was working great. Now I get garbage on the screen, and
>must issue "stty istrip </dev/tty2A" to get the darned thing to work (6 hours
>or experiments determined this). Have I done something wrong or is there 
>something I failed to do during installation, or is there a known bug in 
>cu/ct ?

cu under 2.3 no longer sets ISTRIP as it did in previous versions.  This
was done so that 8-bit characters could be recieved.  It sounds like the
site your calling uses 7 data bits with parity.  You can use the -e and
-o options to cu to get 7 data bits, even and odd parity, respectively.

Ross Oliver
Technical Support
The Santa Cruz Operation