Xref: utzoo sci.electronics:5563 comp.sys.ibm.pc:26153 comp.sys.tandy:1176
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!nrl-cmf!ukma!psuvm.bitnet!jra102
From: JRA102@PSUVM.BITNET
Newsgroups: sci.electronics,comp.sys.ibm.pc,comp.sys.tandy
Subject: Building a speech synthesizer for a pc...
Message-ID: <76032JRA102@PSUVM>
Date: 15 Mar 89 02:12:23 GMT
Organization: Penn State University - Center for Academic Computing
Lines: 17

Has anybody out there ever built a speech synthesizer using Radio Shack's
speech synthesizer IC and their Text-to-speech IC? I've tried using their
circuit diagrams, but to no avail. If anyone has figured out how to apply these
pieces of equipment, let me know.

I'd like to connect it to my 9-pin RS-232 on my Tandy 1000TX (don't tease me
about that, I like my computer) ANY help would be appreciated.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
|                                 |                                    |
|         JAMES R. ACHUFF         | How many mice does it take to screw|
|         129 BEAVER HALL         | in a light bulb?                   |
|    UNIVERSITY PARK, PA 16802    | Two, but they have to be real small|
|         (814)-862-5583          |                                    |
|                                 |=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-|
|  BITNET: JRA102@PSUVM.BITNET    | DISCLAIMER: MY OPINIONS ARE MY OWN |
|  ARPANET: JRA102@PSUVM.PSU.EDU  | AND IF YOU DON'T LIKE THEM, TOUGH! |
|                                 |HAVE A GOOD DAY, AND A NICE FOREVER!|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-