Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!amdahl!pacbell!hoptoad!peora!rtmvax!tarpit!libcmp!root
From: root@libcmp.UUCP (Super user)
Newsgroups: comp.dcom.modems
Subject: Re: Telebit transfer rate problem
Summary: S111 Register Incorrectly Configured
Message-ID: <221@libcmp.UUCP>
Date: 20 Mar 89 01:31:51 GMT
References: <640@island.uu.net>
Organization: Liberty Computers, Inc., Orlando, FL.
Lines: 18



You may wish to check the settings of your "S111" register, if both TELEBIT's
are configured for S111=255, then you have failed to select a valid Protocol.

The TELEBIT which is acting as the originator needs to select a protocol, i.e.
S111=30, and the unit which is answering the call will then configure for the
same protocol if S111=255 on that unit.

I have noted that the PEP connection without a protocol is at least 20% less
efficient. I suggest that you configure your dialer to select a protocol for
dial out contacts, and leave your S111=255 to handle incomming calls.


Ed Unrein		(peora!rtmvax!libcmp!ecu)
Liberty Computers, Inc.	(407) 293-6346 office voice number
UNIX guest account	(407) 299-6947 TELEBIT (8N1) login: guest
UUCP: libcmp Any (speed any) 14072996947 ogin:-""-ogin:-""-ogin:nuucp