Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!oliveb!amdahl!pacbell!noe!eps
From: eps@noe.UUCP (Eric P. Scott)
Newsgroups: comp.dcom.modems
Subject: Re: MultiTech 224E Questions
Keywords: MultiTech 224E S0 Default Autoanswer
Message-ID: <606@noe.UUCP>
Date: 25 Mar 89 06:28:26 GMT
References: <3664@sugar.hackercorp.com>
Sender: usenet@noe.UUCP
Reply-To: epsilon@wet.UUCP (Eric P. Scott)
Organization: Wetware Diversions, San Francisco
Lines: 15

AT&W stores the current settings in NVRAM.
AT&W1 disables NVRAM; subsequent resets use the dip switches.
AT&F loads factory defaults.

Multi-Tech has excellent customer support (in my limited
experience--I haven't had many problems!).  They can be reached
at (800) 328-9717 or (612) 631-3550 voice, BBS (612) 631-0922.

In case it is a firmware problem,
ATI displays model id (241 = MT224, 244 = MT224E).
ATI1 displays firmware version number.
ATI2 displays error correction firmware version (224E only).

<usual disclaimer>
					-=EPS=-