Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!ficc!kunkee
From: kunkee@ficc.uu.net (randy kunkee XNX MGR)
Newsgroups: comp.dcom.modems
Subject: Re: Using Telebits on International Calls
Summary: Solved the no extended result code problem
Keywords: telebit, international
Message-ID: <3644@ficc.uu.net>
Date: 31 Mar 89 18:08:39 GMT
References: <404@nytim.UUCP> <3474@ficc.uu.net>
Organization: Unix/Xenix Support Group
Lines: 18

In article <3474@ficc.uu.net>, kunkee@ficc.uu.net (randy kunkee XNX MGR) writes:
> ...
> One thing that is really strange is that when we connect, we just get
> CONNECT, not CONNECT FAST, not CONNECT FAST/COMP/UUCP (which is what
> we really should be getting).

The answer is: in the dial string we were using X's appended to the end
to make uucico wait longer before giving up.  After pulling my hair out
(of which I don't have much to afford this sort of behavior) I discovered
that after my call if I printed the registers the X register magically
went from X3 to X0.  Hmmph, I say.  Apparently the Trailblazer+ is inter-
preting the X's in the dial string as an X command and defaulting it to
zero.  I have reported this to Telebit.  We have 4.0 proms.
-- 
Randy Kunkee
Ferranti International Controls Corporation
12808 W. Airport Blvd.  Sugar Land, TX 77478
UUCP: uunet!ficc!kunkee       ph: (713) 274-5132